Packaging Solution

Continuously Creating Value for Society

Fastener Packing Machine Price: Counting, Kits and Weighed Bags

For short screws, bolts or nuts sold by net weight, use a matched feeder and weigher over a compatible vertical bagger. Check sharp ends and support the dose as it drops. For packs sold by count, separate overlapping parts before counting. A hardware kit needs each component counted and verified before the bag is sealed.

Indicative prices are US$15,000–45,000 for a defined feed, weigh and VFFS configuration, US$12,000–35,000 for single-part counting and bagging and US$30,000–80,000 for a defined multi-feeder kit system. Confirm the actual part family, bag and verification scope.

Single-part fastener bag, mixed screw nut washer kit and coated paper-bag hardware pack
The contents determine whether the system counts one part, combines several feeds or weighs a batch. Packaging illustration.

Choose the feeder around the contents of each pack

Single-part counting and bagging

For bags containing a specified number of screws, bolts, nuts or nails, a feeder separates the parts before a sensor counts them. An accumulation gate releases the batch into the bagger after the required count is reached. The bagger then seals and discharges the pack.

This arrangement suits a stable part family with repeat orders. Head shape, thread length, finish and oil residue affect how parts travel along the track. Send the smallest and largest examples together: tooling that handles one screw may need changing for another.

Multi-component hardware kit packing

A furniture fitting kit might contain screws, washers and nuts. Each component needs its own feeding path and count setting, followed by controlled collection into the same bag. The control sequence must prevent a missing component from being hidden by the other parts.

Dedicated kit feeding is worth assessing when the same combinations repeatedly take up manual assembly time. During the sample trial, change the recipe, let a feeder run empty and restart after a stoppage.

Weighed fastener bags

For bulk packs sold by weight, weighing can be a practical alternative to individual counting. Use a scale and feed arrangement suited to the part weight and the bag load. Sharp nails, long bolts and dense metal batches also affect the chute, drop height and bag support.

A weight result cannot establish an exact piece count when individual part weights vary. If the customer buys a counted kit, validate the count directly or define a suitable secondary check.

Multihead weighing unit above a vertical form fill seal bagging machine
Weighing and vertical bagging platform. The selected feeder, weighing system and bag support follow the product and pack load.

Control counts, kit contents and bag damage

Packing problemMatched equipment or configurationHow it responds and what to checkApplicable product
Parts overlap and counts driftSingulating counting feederAdjust the track and feed rate so the selected sensor can distinguish passing parts; inspect counted batches after starts and stops.Small screws, washers and reflective metal parts
A kit has the correct weight but a missing componentSeparate kit feeders with recipe and completion checksVerify each component release before allowing the next bag cycle; test deliberate feeder starvation and recipe changes.Mixed furniture and hardware kits
Metal parts puncture bags or lodge in the sealSupported discharge, suitable chute and selected bag filmReduce uncontrolled impact and keep the batch clear of the sealing jaws; inspect drops, seams and handling damage with the full pack.Nails, long bolts and heavier bags
Operators lose time changing part combinationsSaved recipes and accessible change partsIdentify feeder, guide and bag-format changes for each SKU; measure a complete change including count verification.Several hardware kits on one shift

Which fastener packing arrangement fits your orders?

Production situationFinished packStarting routeConfiguration inputs
Repeating screw SKU for distribution
Counted clear bagSingle counting channel plus baggerPart dimensions, finish, count per bag and maximum bag load

Change the feeding tooling when part geometry changes.

Flat-pack furniture assembly kits
Mixed screws, nuts and washers in one bagSeparate feeders with kit recipe controlComponent list, quantity of each item and kit-change frequency

Add completion checks when a missing part invalidates the kit.

Bulk fasteners sold by weight
Heavier sealed bagWeighing feed plus supported bag dischargeTarget net weight, sharp edges, film strength and handling test

Use direct counting if exact quantities are contractual.

Work that remains manual at each automation level

Production modeOperator workChangeover implicationsAcceptance focus
Manual or assisted batchingOperator counts/loads; bagger closes the packFlexible for short runs; manual verification remainsCheck count and seal quality at the intended work rhythm
Automatic single-part systemOperator replenishes parts and removes finished bagsPart-track and bag changes are the main setup tasksRun representative sizes and restart conditions
Automatic hardware kittingSeparate feeds run to a stored kit recipeMore tooling and setup; fewer repeated hand-counting tasksChallenge missing components, recipe selection and changeover

Film, paper bags and product-contact requirements

Transparent heat-sealable film lets the buyer see the contents. For a paper-bag specification, send the actual paper structure and closure: coated heat-sealable paper and an uncoated paper bag need different closing arrangements. Match film strength, seal width and discharge support to the full metal load.

A carded blister or high-frequency sealing enquiry describes a different pack construction. Send that finished retail pack so we can assess its materials and sealing process separately from ordinary bagging. Bearing protection is also a separate product task. Certification requests should name the destination and required documents for the selected configuration.

Budget for the selected equipment scope

These planning ranges concern new equipment supplied from China for a defined product and format. Product preparation, extra formats, freight, taxes, overseas installation and site work are excluded unless expressly listed. Equipment additions and commercial terms are settled in the formal quotation. Special product-contact, safety or environmental requirements can change the scope.

Equipment scopePlanning budgetRange applies toItems to define separately
Single-SKU counting and baggingUSD 12,000 to 35,000One defined part family, count setting and bag formatPart tooling, feeding and bagging scope specified together
Multi-component fastener kit systemUSD 30,000 to 80,000Several defined feeder channels and kit recipesVision inspection, unusual parts and extra formats priced separately
Optional retail cartonerUSD 25,000 to 80,000One defined filled kit bag and retail cartonProduct loading, extra carton sizes and leaflet handling specified separately
Feed, weigh and VFFS bagging for net-weight fastener packsUSD 15,000 to 45,000One short-part family and one bag format; matched feed, weighing, bagger and supported takeoffExtra wear protection, unusual/sharp parts, inspection and additional formats priced separately

Add retail cartoning when the sales pack requires it

If the retail specification places the sealed fastener kit inside a small paperboard carton, add cartoning after bagging. The product loader must suit the bag stiffness and the filled metal weight. Specify whether the carton receives one kit, several bags or a leaflet. The cartoning scope and price sit alongside the bagging system; they are not included in the counting budgets above.

Sealed fastener kit bag inside a retail carton
Retail cartoning follows the completed primary pack and is optional project scope. Illustration.
Retail paperboard cartoning machine
Retail cartoning platform. Product loading, carton format and any leaflet or insert are specified together.

Calculate kit output and feeder demand

For an illustrative order of 2,400 kits in 400 available production minutes, the required acceptable output is 6 kits per minute. A kit with 4 screws and 4 washers requires each feeder to sustain at least 24 pieces per minute at that bagging rate, with capacity for replenishment and recovery. Compare quoted output on complete acceptable kits and include stoppages and changeovers in the shift plan.

Ask for power and compressed-air requirements, then compare measured consumption for the same workload, including idle time. Divide electricity and compressed-air costs by accepted packs. Add labour, film, rejected kits and changeover time to compare total cost per good kit. Nameplate power by itself does not give that cost.

Compare proposals on the same product and pack

DimensionEvidence to compare
Budget and scopeThe equipment operations, product and formats represented by each price.
OutputUse the same part samples and complete kit list for every proposal. Compare missing-part detection, part replenishment and recovery as carefully as bagger cycle speed.
Product and format fitPhotos or samples of every part, with dimensions and surface condition; Finished bag dimensions, material and maximum filled weight.
SupportTraining, contact parts, spares and the responsibilities for commissioning and support.
DeliverySamples, format confirmation, layout, documentation and acceptance milestones.

Questions to settle before ordering

Can one machine pack screws, bolts and nuts?

If their sizes and shapes fall within the selected feeder and bagging setup, one system can cover several parts with suitable guides and recipes. Send the full size range before deciding which tooling can be shared.

Is weighing accurate enough for counted screw kits?

For a pack sold by weight, weighing addresses the sales requirement. For an exact-count kit, check individual part-weight variation and verify counts directly; equal total weight does not establish that every component is present.

How do I compare automatic packing with manual kit assembly?

Use the same good-kit output, shift hours and kit mix. Include counting labour, replenishment, changeovers, rejected kits and film. Automation is easier to justify when repeated combinations keep the feeders productive.

What should a screw packing machine video show?

Ask for a continuous run using the target parts and bag count, followed by a recipe change and a controlled restart. A short empty-machine clip cannot show whether the parts separate or the complete kit is correct.

Get a proposal for your fastener kit

Send photos or samples of the parts and finished bag, the count or fill, and the output you need. For a detailed proposal, include:

  • Photos or samples of every part, with dimensions and surface condition
  • Exact component list and quantity per bag; smallest and largest kit
  • Finished bag dimensions, material and maximum filled weight
  • Required acceptable kits or bags per shift and available packing time
  • SKU mix, change frequency, printing and inspection requirements
  • Destination, available space, power and compressed-air conditions

Comwin will recommend the feeding and packing operations, explain the configuration and sample trial, and quote the agreed equipment scope.

Comwin provides free sample testing and can arrange real factory visits. Small-equipment support includes video tutorials and remote video calls. The whole-machine warranty is two years, with three years for core components and remote response within 24 hours. Support and installation responsibilities are specified for the project.

Arrange free sample testing · Send your packing requirements

 

Table of Contents

Our packaging categories

We offer a complete range of packaging solutions.

Packing Sample
Bagged packaging
Packing Sample
Vacuum packaging
Packing Sample
Blister Packaging
Packing Sample
Filling/Bottling
Packing Sample
Heat Shrink
Case packaging
Case packaging

Get Your Quote

What delivery did you have in mind? Fill in the details below to receive a quote.