Tofu packaging depends on what arrives at the machine. Firm blocks can be loaded into trays with the specified liquid before lidding. Some established silken-tofu processes fill liquid into tubs before setting. Dense seasoned tofu may suit a separately validated vacuum-pouch process. Each needs different product handling.
For hand-loaded tofu tray lidding, allow an indicative USD 5,000 to 20,000. Filling liquid and lidding one specified tub format is USD 20,000 to 70,000. A hand-loaded vacuum-sealing platform has a reference range of USD 3,000 to 15,000. Comwin specifies support, filling and sealing for the tofu, container and established food process.

Choose the packaging operation from the tofu at the infeed
A tray supports tofu that deforms during transfer. Tub filling is a separate dosing and lidding job for the defined product condition. Use vacuum only where the approved pack and handling process suit a firm product, and confirm the shape after sealing.
Firm tofu blocks in liquid-filled trays
Support the block during transfer into a preformed tray, add the specified packing liquid if required, and keep the flange clear before heat sealing the lidding film. Tray depth, block clearance and liquid fill affect splashing and handling.
Hand loading can suit short runs or fragile blocks. Before automating placement, measure breakage and positioning as well as output. Trial the tray and film together for seal integrity; the appearance of a closed pack alone cannot establish it.
Silken tofu filling and tub sealing
Where the established tofu process fills a liquid mixture before setting, the packaging equipment meters that mixture into the selected tub and applies the lid film. The upstream preparation and subsequent setting or thermal process must be defined by the food-process specification.
Select filling parts and transfer to maintain the dose and keep the flange clean. Specify permitted hold time and mixing. Loading formed blocks and dosing a liquid mixture require different equipment operations.
Seasoned firm tofu in vacuum pouches
For dense seasoned tofu suited to vacuum packing, place the product in a compatible pouch, position its opening cleanly and evacuate/seal using the selected process. Assess product deformation and any liquid movement during evacuation.
Assess vacuum packing for firm tofu that retains the required appearance after evacuation. Very soft tofu needs separate support and process assessment. Vacuum alone does not establish microbial safety, room-temperature storage or shelf life.
Keep tofu intact and sealing flanges clear
| Packing problem | Matched equipment or configuration | How it responds and what to check | Applicable product |
|---|---|---|---|
| Blocks break between cutting and loading | Supported transfer with product-specific placement | Count broken or misshapen blocks during a representative trial. | Firm but delicate tofu blocks |
| Water or mixture contaminates the flange | Controlled filling and adequate container clearance | Inspect flanges after transfer and before sealing. | Water-packed or liquid-filled tubs |
| Vacuum distorts the product | Route chosen for the actual firmness and pack | Evaluate the opened product after evacuation and storage handling. | Seasoned firm tofu |
| Tray changes cause misalignment | Matched nests and documented format parts | Confirm tray seating and seal position on each format. | Several tray dimensions |
Water-packed blocks, silken tubs and seasoned vacuum packs
| Production situation | Finished pack | Starting route | Configuration inputs |
|---|---|---|---|
Already-formed blocks packed with water![]() | Heat-sealed preformed tray | Supported block loading, liquid dosing and tray sealing | Block fragility, tray fit and flange cleanliness Automate loading only after breakage trials. |
Liquid mixture filled before setting![]() | Lidded silken-tofu tub | Controlled filling and tub lidding | Established mixture and downstream process Define setting and thermal interfaces separately. |
Dense seasoned ready-to-pack tofu![]() | Vacuum pouch | Hand or selected automatic loading with vacuum sealing | Firmness, liquid content and final product shape Choose a supported tray route if evacuation damages the product. |
Block loading, liquid filling and tray replenishment
| Production mode | Operator work | Changeover implications | Acceptance focus |
|---|---|---|---|
| Hand loading with powered tray sealing | Operator places blocks, liquid and trays | Flexible batches; handling labour remains | Block condition, flange cleanliness and seal |
| Automatic filling and lidding | Operator supplies containers and product | Filling and sealing formats are specific to the tub | Dose, transfer and lidding at normal product condition |
| Integrated product loading and packaging | Defined handoff from the prepared tofu process | Block placement and cleaning need coordinated access | Good packs including broken-product and closure rejects |
Tofu firmness, portion size and sealing material
Send tofu at the packing stage, with firmness, dimensions, liquid or sauce and temperature information. Supply the tray, pouch and lidding material together. Check sealing surfaces and clearance with a filled pack; an empty-container demonstration omits those conditions.
Tofu filled as liquid into tubular bags needs its own dosing, tube-forming and closing arrangement. Soybean grinding, cooking, coagulation, heat treatment and cold-chain control remain separate food-process operations. The packing equipment must fit the agreed handover from those processes.
Tofu filling and sealing equipment budgets
These planning ranges concern new equipment supplied from China for a defined product and format. Product preparation, extra formats, freight, taxes, overseas installation and site work are excluded unless expressly listed. Equipment additions and commercial terms are settled in the formal quotation. Special product-contact, safety or environmental requirements can change the scope.
| Equipment scope | Planning budget | Range applies to | Items to define separately |
|---|---|---|---|
| Hand-loaded tray-lidding station | USD 5,000 to 20,000 | One compatible tray/film format with powered sealing | Automatic block loading, liquid dosing and upstream processing |
| Defined liquid filling and tub-lidding configuration | USD 20,000 to 70,000 | One product condition, tub format, dosing and lidding scope | Soy processing, validated heat treatment and automatic block loading |
| Hand-loaded vacuum-sealing platform | USD 3,000 to 15,000 | Selected chamber and pouch process for defined firm tofu | Automatic pouch loading, additional formats and food-process validation |
Measure intact, sealed trays through the whole cycle
For an illustrative batch of 1,800 tofu trays in 180 available minutes, the requirement is 10 acceptable trays per minute. If block loading supplies only 7 acceptable trays per minute after breakage and handling, a faster sealing cycle will not meet the order. Define good output after damaged blocks and leaking packs are rejected.
Trial product at its real temperature and firmness. Inspect placement, liquid splashing, flange condition and sealing, then open representative packs to assess product quality. Shelf-life and preservation decisions need the appropriate food-process validation and cannot be inferred from the absence of a visible leak.
Compare proposals on the same product and pack
| Dimension | Evidence to compare |
|---|---|
| Budget and scope | The equipment operations, product and formats represented by each price. |
| Output | Compare good packs and intact tofu, with the food-process interfaces stated separately. |
| Product and format fit | Tofu sample at packing stage, firmness, dimensions and temperature; Complete tray/film or pouch samples. |
| Support | Training, contact parts, spares and the responsibilities for commissioning and support. |
| Delivery | Samples, format confirmation, layout, documentation and acceptance milestones. |
Questions to settle before ordering
Can soft tofu be vacuum packed?
If the product deforms or releases excessive liquid under evacuation, assess a supported tray route instead. A vacuum demonstration with firm seasoned tofu does not establish suitability for soft tofu.
Does a tray sealer also fill silken tofu?
If filling is required, dosing and product supply must be included in the configuration. A sealing-only station assumes the tray has already been loaded.
Can the machine extend shelf life?
For a shelf-life target, validate the actual food process, package and storage conditions. No universal duration follows from choosing a tray seal or vacuum pouch.
Is a Japanese tofu bag machine the same as a block-tofu packer?
If the task is liquid filling into a tubular bag before setting, it needs its own dosing, forming and closing assessment. Loading formed blocks into trays is a different task.
Arrange a trial with tofu at the packing stage
Send tofu and finished-pack photos or samples, the portion quantity and required output. Include these details for the proposal:
- Tofu sample at packing stage, firmness, dimensions and temperature
- Liquid, sauce or mixture properties and target portion
- Complete tray/film or pouch samples
- Good packs per shift and acceptable product damage limits
- Established setting, heat-treatment and cold-chain interfaces
- Cleaning method, handling boundaries and format range
Comwin will recommend block handling or liquid filling and the closing process, explain the configuration and sample trial, and quote the agreed scope.
Comwin provides free sample testing and can arrange real factory visits. Small-equipment support includes video tutorials and remote video calls. The whole-machine warranty is two years, with three years for core components and remote response within 24 hours. Support and installation responsibilities are specified for the project.
Arrange free sample testing · Send your packing requirements
