Packaging Solution

Continuously Creating Value for Society

Ribbon Packing Machine Price: Spools and Folded Bundles

A ribbon packing machine bags finished textile ribbon spools or folded bundles. The ribbon must reach the wrapper in a stable shape: the spool tail secured, or the bundle held together. The bag then keeps that prepared product tidy during handling and sale.Allow roughly US$5,000–25,000 for an operator-loaded flow wrapper. A defined section that spaces and transfers prepared spools into the wrapper has a US$12,000–35,000 planning range. Winding, measuring ribbon length and fixing loose tails are separate preparation tasks.
Wound blue ribbon and folded yellow ribbon in separate clear bags
Ribbon spool and retained folded bundle in pillow bags (packaging illustration).

Start with the spool or folded bundle

Secure the ribbon tail before transfer. Contact the spool on a stable surface so the ribbon face stays clear of guides. A folded group needs bottom support until the film holds it together. The prepared-spool feed and wrap price assumes the stated incoming orientation.

Product entering the wrapperSupport to assessPrepared state
Rigid ribbon spoolContact at suitable flanges, with clearance around the wound ribbon.Tail held flat and clear of the film path.
Folded ribbon bundleSupport beneath the bundle and restraint that keeps folds together.Ends aligned; band or other approved restraint already applied.
Bare blue ribbon spool with secured short tail and a yellow folded bundle retained by a paper band
Spool tail retained before wrapping; folded bundle held by a band (preparation illustration).

If the ribbon opens during transfer

First add a suitable preparation step. That may be a retaining tab, band or another restraint compatible with the ribbon. Identify whether it is applied upstream, manually beside the wrapper or by additional equipment. The illustrated tab shows the required retained state; its adhesive still needs an appearance check on the actual ribbon.

Keep the ribbon face and edges presentable

Where a spool has firm flanges, use those surfaces for support when the geometry allows it. Keep guide contact away from the satin face and keep the tail inside the product profile. Peel off a sample retaining tab after packing and check for residue or a pulled surface.For a folded bundle, inspect the band contact and the outer folds. A band tight enough to hold the shape may still leave an unacceptable crease. Compare the same bundle before transfer and after opening its bag, including the face, fold edges and retained ends.

Choose feeding around the orders you run

Changing from a spool to a folded bundle

Changeover stepWhat changes
Support and contactReplace flange-based guidance with support beneath the bundle; keep the retaining band clear of interference.
Film pathCheck the full width and height of the restrained bundle, then select compatible film width and forming setup.
Bag length and spacingLeave the ends clear of both transverse seals and prevent the bundle opening between infeed positions.
First packsOpen them and compare the ribbon face, edges, folds and restraint with the unpacked sample.
A saved setting can recall an adjustment, but cannot replace a different physical support. For short varied orders, an operator-loaded infeed can accommodate prepared products while the wrapper repeats forming and sealing.

A repeated spool order

Example: prepared spools supplied in a fixed orientation
1. Manual replenishmentOperator places tail-secured spools into the specified supply position.
2. Spacing and transferEquipment releases and moves spools at the required pitch.
3. Form and sealThe wrapper encloses each supported spool.
4. DischargeClosed bags leave for collection.
The equipment spaces and transfers the prepared spools. Operators replenish the supply position and film.

Ribbon wrapping budgets and remaining manual work

October 2026 planning allowanceReference taskOperator work
US$5,000–25,000 Operator-loaded wrapperOne approved prepared spool, compatible infeed, film forming, sealing and discharge.Place each spool on the infeed, replenish film and collect output.
US$12,000–35,000 Prepared-spool spacing and wrappingThe same spool, supplied in a fixed orientation; specified release, spacing and supported transfer, plus the wrapper.Replenish the defined supply position and film; perform stated interventions. Tail is already secured.
Both are conditional planning ranges for new China-supplied equipment and one compatible spool/film format. The second price adds the spacing and transfer task shown above. A bundle or substantially different spool needs its own support and feed review.Winding, ribbon-length measurement, tail fixing, complex mixed sets and cartoning are separate. Freight, taxes and overseas installation are additional unless listed. The ranges do not establish an output rate or a capability for every spool diameter.

The outer-bag operation

The horizontal flow wrapper forms and seals the bag around the prepared product.
Actual flow wrapper with product infeed, forming and sealing sections
Flow-wrapper platform; spool positioning and tail preparation are separate application tasks.

Count finished packs over the available shift

An illustrative requirement of 1,800 single-spool packs per hour equals 30 bags per minute. Three spools per bag would require ten bags per minute, while feeding and grouping still handle 30 spools. Use the time actually available after changes and replenishment when matching the equipment.During the agreed run, record packs with trapped tails, opened folds, marked ribbon or damaged flanges. Then open representative bags and inspect the product again. The result should reflect the appearance customers receive, as well as the number of sealed bags.Where storage moisture protection is required, film and package performance need their own specification. A tidy transparent bag alone does not establish that protection.

Send the ribbon in its incoming condition

 Share the spool or folded bundle with Comwin, including its present restraint, desired bag and batch pattern. We can identify the contact surfaces, format changes and preparation needed alongside wrapping. This guide concerns finished textile ribbons; coding-ribbon printers and winding machines perform other operations.Comwin offers free sample testing, a two-year machine warranty and a three-year warranty for core components. Remote support responds within 24 hours; installation and training are specified in the proposal.

Table of Contents

Our packaging categories

We offer a complete range of packaging solutions.

Packing Sample
Bagged packaging
Packing Sample
Vacuum packaging
Packing Sample
Blister Packaging
Packing Sample
Filling/Bottling
Packing Sample
Heat Shrink
Case packaging
Case packaging

Get Your Quote

What delivery did you have in mind? Fill in the details below to receive a quote.