For a fixed-count retail pack of whole garlic bulbs, a horizontal flow wrapper can close film around a low, stable row of bulbs. Guides hold the count together through the former, and the stems must stay clear of the seals. Peeled cloves in a film bag call for gentle weighing and a vertical bagger. If the retailer specifies mesh for whole bulbs, the line needs a separate net-closing station.
For one agreed whole-bulb pack, budget US$5,000–25,000 for a compatible hand-fed horizontal wrapper before automatic counting and spacing. A compatible vertical bagger alone is US$5,000–30,000. A basic three-bulb mesh unit with bulb separation, counting and clipping is US$18,000–55,000.

Choose the pack for whole bulbs or peeled cloves
| Garlic pack | Route | What to check |
|---|---|---|
| Three whole bulbs in a sealed film pack | Feed the counted group in a stable row to a compatible horizontal flow wrapper. | Run mixed bulb diameters and normal stem lengths. Check count, film punctures and clearance at both end seals. |
| Peeled cloves in a closed retail film pouch | Assess a gentle weighing system and a compatible vertical bagging machine. | Look for clove adhesion in the chute and pieces or moisture crossing the seal zone. |
| Small fixed-count whole-bulb net | Count bulbs and load a compatible mesh tube or bag, then close the ends with the specified clip. | Test the smallest bulbs and most projecting stems. Check count and room at the gathered ends. |
| Larger whole-bulb bag sold by weight | Weigh the portion, support the bag during filling and close the net. | Inspect giveaway, damaged skins and closure integrity with the heaviest normal fill. |
Whole bulbs: count or weigh → feed net → clip
Peeled cloves: weigh → verify clean discharge → seal
Flow wrap a counted group of whole bulbs

Three whole bulbs can travel in one row on a supported belt. On a hand-fed machine an operator forms and places each group. For higher output, trial an infeed that spaces the bulbs, forms the three-piece group and clears a short count before sealing. Long stems can snag or puncture film, so run bulbs from the full size range with the stems as they arrive from grading.
Confirm the film and any ventilation with the produce team. Inspect skins, stem marks and the pack seals after handling and the intended hold period.

Peeled cloves: weigh, release cleanly and form the film bag

For peeled cloves, run a sustained dose trial using their actual surface moisture. Inspect the chute for pieces held over from the preceding dose. Agree who validates the approved pack and product storage process. A film closure alone cannot establish the storage conditions or shelf life of fresh peeled garlic.
A fixed-count garlic net follows its own feed cycle
Three-bulb net pack — process diagram, not a machine layout
- 1 → Separate and count.For the quoted bulb-size range, feed bulbs one at a time and confirm three releases for each pack. A double or missed feed must be detected or stopped by the selected control.
- 2 → Transfer to the net tube.Guide the counted group into supported tubular netting. Keep stems from catching on the tube or entering the gathering area.
- 3 → Gather, clip and separate.Close the net neck beyond the bulbs with the specified clip and separate the completed pack. Tool clearance must accommodate normal stems and roots.
- 4 → Discharge and inspect.Support the closed net on discharge and check count, clip retention and bulb condition. Refill net and clips as part of the operating cycle.
A pack sold by weight uses an agreed weighing feed instead of the fixed-count feed. The same photograph of a closed net cannot demonstrate both dosing systems; the quotation must identify which one supplies the bulbs.
Use the smallest bulb and the longest normal stem
Put the smallest bulb and the longest normal stem through the proposed feed and closure trial. The small bulb tests retention and count; the long stem tests clearance and the risk of snagging the net. Check these again after normal transport handling. If the skins shed, inspect buildup around sensors and the clip station at the end of the run.
Specify the acceptance unit before comparing output
For short runs and variable bulbs, compare an operator counting into a supported net with automatic count feeding. For a repeated fixed-count pack, have the supplier show what happens after a double feed, a gap and a stop. If the pack is sold by weight, collect individual pack weights and track the overweight allowance. Count and weight are different acceptance tests.
Garlic packing machine cost by closure and feed scope
For one agreed size and count, a compatible hand-fed horizontal wrapper has an indicative base price of US$5,000–25,000. Quote automatic counting, spacing, bulb guides and any ventilation features separately.
For a new, basic single-format three-bulb mesh pack, an indicative China-supply equipment budget is US$18,000–55,000. The assumed scope includes basic automatic separation and count feeding for an agreed bulb-size band, supported tubular-net loading, an automatic clipper and basic discharge. Routine net and clip replenishment remains operator work.
Additional count formats, special stem handling, extra tooling, vision inspection and downstream case work are separate. If a weighed pack is required, quote the weighing feed as an alternative; this estimate does not include two automatic dosing systems. The actual bulbs and net must pass the agreed trial before the configuration is confirmed.
For peeled cloves, the compatible vertical bagging machine alone has a US$5,000–30,000 reference. Price the moisture-tolerant feeding, weighing and cleanable contact path separately. Freight, taxes and site work are excluded from these equipment references.
Do garlic powder and garlic cloves use the same dosing system?
Garlic powder needs a dosing system suited to its flow and dust. A peeled clove is a discrete, potentially moist piece. Its size, adhesion and portion weight determine the feeding trial. Garlic paste needs a different dosing arrangement again. A nominal kilogram capacity does not make these tasks interchangeable.
Start with the garlic and the finished pack
Share photos of the bulbs or cloves, the pack count or net weight, size variation and required good packs per hour. Comwin can propose the corresponding feed and closure and identify the trial samples. We then review stem or moisture variation, packaging material and any equipment that must remain in the line. Compare the garlic packing routes with Comwin.
