Packaging Solution

Continuously Creating Value for Society

Toothpick Packing Machine Price for Single Sleeves and Counted Packs

A toothpick packing machine begins with finished picks. For restaurant singles, separate and align one pick before closing a paper sleeve. For a retail count pack, build and verify a group before transferring it to the film wrapper. Compare output in accepted packs per minute, since the same number of picks can produce very different numbers of packs.

A single-sleeve station with basic automatic feed for one straight pick size and specified stock and closure is US$8,000–25,000. A compatible horizontal wrapper for pre-grouped picks is US$5,000–25,000 before counting and group transfer. Quote printing and inspection separately and verify the required accepted sleeve rate.

Individual paper sleeve, loose toothpick and sealed film group
A single paper sleeve and a counted film group. The loose pick shows the size of the input. Packaging illustration.

Choose the infeed by the finished pack

Target packInfeed and wrapperAcceptance check
One toothpick in a paper sleeveSingulate, align and apply a compatible paper sleeve.Open sampled sleeves and count empty and double feeds. Check both ends for exposed tips.
Fixed-count parallel group in clear filmCount the group, keep it aligned in a transfer pocket and use a suitable horizontal wrapper.Test the longest pick and check tip punctures, pack count and seal clearance.
Multiple pick lengths across short runsUse the corresponding sleeve or count-pack route with quick access to guides and format parts.Time a changeover from the last good pack in one size to the first stable batch in the next.

Single sleeves: singulate → align → close one sleeve per pick

Count packs: build group → hold alignment → wrap together

Single sleeves need a feeder and closure matched to the paper

One toothpick on paper, an open formed sleeve and a fully closed individual paper sleeve
Paper, formed sleeve and closed single pack. This example uses compatible heat-sealable coated paper; both end seals extend beyond the pick. Packaging illustration.

Paper appearance does not tell you how it will close. A paper-sleeve specification may require adhesive application and setting or drying. A confirmed heat-sealable coated paper instead needs compatible temperature, pressure and dwell at the sealing tools. Film needs its own confirmed sealing conditions. These are configuration choices to settle with the actual wrapping stock, not interchangeable materials to assume on one machine.

Single-pick sequence — process diagram

  1. 1 → Singulate and align.Release one finished pick into each indexed position, with the tip held away from the future end seals.
  2. 2 → Form the sleeve.Guide the wrapping web around the pick and locate the seam. The sample above shows the packaging states, not a cut-sheet feeder.
  3. 3 → Close for the specified material.Use the agreed adhesive-and-setting or heat-sealing arrangement. Check seam closure and the empty end allowance before separating the pack.
  4. 4 → Separate and check.Cut individual sleeves; detect or sample-check empty and double feeds according to the selected inspection scope. Define stopped-feed and restart handling.

For a small first order, one pick size and one agreed wrapping stock give a clearer trial than an unspecified claim to run every paper and film. Additional sizes or materials need their own settings and, where required, tools.

Watch for trouble between singulation and the seal

Ask for a continuous side view of the hopper outlet, guide and seal zone. Use normal production material, including permitted diameter and straightness variation. A bowed or doubled pick can turn during transfer and reach the jaws before it is detected. Ask which faults stop the feeder, which packs are diverted and how restart packs are kept separate.

Counted groups use a separate transfer into the flow wrapper

Representative wrapper for a prepared group of picks
Representative wrapper for a prepared group of picks. The single-sleeve route uses its own feeder and closing system.

On a count pack, check retention while the group is accelerated or transferred. Picks that fan out can puncture the film, interfere with the end seal or escape before wrapping. Use the same wood or bamboo stock, wrapper material and permitted tip shapes for the trial that you expect to run after delivery.

Translate a 500 pieces per minute request into accepted packs

At one pick per sleeve, 500 picks per minute means 500 sleeves per minute before losses. At ten picks per pack, the same input gives 50 packs per minute before losses. Treat 500 as a requested input rate until a continuous trial demonstrates sustained output, count accuracy, film or paper changes and recovery after a jam. A short video can illustrate the mechanism; it cannot show a full shift’s yield.

Toothpick packing machine price by station

For a new single-sleeve station with basic automatic feed for one straight pick size and one specified wrapping stock and closure, an indicative China-supply equipment budget is US$8,000–25,000. This does not quote a guaranteed 500-sleeves-per-minute configuration. If that rate is required, select and price the machine against a sustained trial at the agreed quality level.

A compatible horizontal wrapper for pre-grouped picks has a separate US$5,000–25,000 reference before count feeding and group transfer. Extra format tooling, printing and vision inspection are separate options. Paper or film and any adhesive are running consumables; freight and site work are separate project costs. Compare quotations using the same stock, pick specification, operator tasks and accepted pack rate.

Does this equipment make bamboo toothpicks?

These machines load and wrap finished picks. Send samples after the cutting, shaping and sorting steps. A pick-making machine has a different output and cannot be compared using a sleeve packer’s rate.

Show us the pick and the pack you want

Send pick and pack photos, the single or grouped quantity, pick length and diameter, and target packs per minute. Comwin can recommend the single-sleeve or grouped-pack configuration and organise a trial with the intended wrapping stock. The trial checks feeding, closure, empty or double packs and restart handling. Request a toothpick packaging configuration.

 

Table of Contents

Our packaging categories

We offer a complete range of packaging solutions.

Packing Sample
Bagged packaging
Packing Sample
Vacuum packaging
Packing Sample
Blister Packaging
Packing Sample
Filling/Bottling
Packing Sample
Heat Shrink
Case packaging
Case packaging

Get Your Quote

What delivery did you have in mind? Fill in the details below to receive a quote.