Packaging Solution

Continuously Creating Value for Society

Granule Filling Machine Price: Cup Dosing and Weighing

A cup doser works when a free-flowing granule fills a repeatable volume. Use a linear or combination weigher when the declared weight matters and bulk density varies. The dose can discharge into a compatible vertical bagger for a rollstock pack. A jar or bottle needs its own positioning and transfer.

Indicative module prices are US$3,000–8,000 for a standalone cup unit, US$4,000–15,000 for a linear weigh filler and US$8,000–30,000 for a combination weigher. A modest automatic container positioning and filling section is US$15,000–45,000. Specify film bagging or final closure separately.

Compare the measuring principle

MethodHow it measuresWhat to verify
Volumetric cupsFill a defined cup volume, then discharge itFlow into the cup, level consistency and resulting mass variation
Linear weigh fillingFeed product into a weigh hopper until the required dose is reachedCoarse/fine feed, stable weighing and discharge timing
Multihead combination weighingSelect a combination from several weighed portionsProduct distribution, suitable portion sizes, discharge and total accepted output
Piece counting where requiredCount individual items or use a validated counting arrangementItem separation, missing/double counts and the exact quantity requirement
Rotary measuring-cup assembly under a product hopper
A cup unit meters volume. It does not form bags, position jars or apply closures.
A volumetric “cup filler” describes the measuring cups inside the doser. It does not necessarily mean a machine that fills and seals retail cups. Name the package and dosing principle separately in the enquiry.

Choose cups, linear weighing or combination weighing

Start with cups when the material supports volume dosing

Uniform, free-flowing granules are candidates for a cup unit when repeated filled weights remain within your required range. Measure the result through ordinary hopper-level changes and replenishment. The cup size sets volume; it cannot by itself compensate for a changing bulk density.

Move to weighing when mass variation matters

A linear weigh filler prepares the required batch by mass and is worth comparing when volume dosing produces too much weight variation. Assess the coarse/fine feed and discharge cycle at the actual dose. A heavier or larger portion can also change the funnel and receiving package.

Assess combination weighing against the required output

A multihead system combines several weighed portions to make the dose. Compare it with simpler weighing when pieces vary or higher output is needed. Use the actual portion size to check product distribution, breakage and completed-pack output; the number of heads alone will not answer those questions.

When a stable cup volume gives a changing weight

A cup can repeat its volume while the product’s mass changes with bulk density and how it settles. For illustration, a 500 mL dose at 0.75 g/mL contains 375 g; at 0.80 g/mL it contains 400 g. These are assumed values explaining the calculation, not claimed properties of a particular granule.If this weight variation exceeds your limit, assess weight-based filling or suitable feedback. A larger cup increases the nominal volume but leaves density variation unresolved.

A correct total weight may not be the quantity you need

For a mixed product, check the amount of each ingredient as well as total weight. If ingredients separate, assess controlled blending or separate feeding. A total-dose weigher measures the combined mass, so the ingredient ratio needs its own check.For a pack promised as an exact number of pieces, evaluate item separation and a counting method for those items. “Particle filling machine” and “granular filling machine” are broad names; neither identifies whether the installation controls volume, mass, ingredient ratio or individual count.

The dosing unit needs a complete discharge path

Capped rice jar beside a sealed rice pillow bag
Rice in a jar and a heat-sealed bag (pack illustrations). Each needs different package handling and closing equipment.

Fill a rigid container

Present and locate the open container → release the dose through a suitable funnel → allow settling if needed → transfer to the specified cap/lid operation.

Fill a bag

Form or present the open bag → support it under the outlet → release and clear the dose → close the bag with the compatible sealing arrangement.
A vertical form-fill-seal machine can provide the roll-film bagging operation around a matched doser. A supplied premade bag needs its own opening and support system. A jar needs positioning and a separate closure. The same dosing principle does not make those packaging operations interchangeable.

Control the delivered quantity without slowing or damaging the product

Production problemRecommended equipment or changeHow it helpsWhere it applies
Cup-filled packs vary too much in weightWeight-based filling or suitable feedback after reviewing the product variationMakes actual mass part of the dosing controlProducts sold by weight whose density or cup filling varies beyond the allowed range
Granules bridge or the dose remains in a chuteHopper throat, feed, funnel and discharge timing selected for the product geometryKeeps the product moving through the complete path into the packageIrregular particles or narrow container mouths; inspect the outlet through normal running
Pieces break, bounce or spill during transferControlled feed and a suitable drop height, funnel and package supportLimits unnecessary impacts and keeps the discharged portion inside the packFragile pieces and narrow-neck jars; compare product condition and spillage
Dosing is fast but the package cannot receive the portionA receiving hopper, indexer or bag presentation matched to the doseCoordinates release with a ready, supported packageAutomatic bottle filling or bagging; measure correctly filled packs at the required dose
Include normal high and low product levels, replenishment and restarts when checking the system. Oily, sticky, dusty or abrasive products may need different contact surfaces and feeding. Assess those conditions with the actual material.

Granule filler budgets by metering and handling scope

For initial planning, use these indicative budgets for new equipment supplied from China and one approved ordinary dry product, dose and format. The first three ranges refer to metering units; the fourth adds a defined container-filling operation.
Equipment scopeIndicative budgetSupply boundary
Standalone volumetric cup unitUS$3,000 to 8,000Volume metering and discharge; package handling is specified separately
Basic linear weigh fillerUS$4,000 to 15,000Weighed batch preparation and discharge
Selected combination weigherUS$8,000 to 30,000Multiple weighed portions and combination discharge
Modest automatic container-positioning and filling sectionUS$15,000 to 45,000A defined feeder/doser, container presentation and filling arrangement
Choose one of the first three metering options for the budget. The automatic container-filling range already includes its selected doser; confirm the equipment list before adding a separate weigher price.The final quotation should list the feeder, hopper, funnel, controls, platform and container handling. Bulk supply, bag forming/sealing, container closures, coding, inspection, palletizing, freight, taxes and overseas installation are excluded unless listed. Exact piece-counting equipment needs its own item and application assessment.

Match each dose to a package ready to receive it

With a standalone filler, the operator positions the bag or container and transfers it to closing. An automatic container filler adds positioning and discharge timing, while operators replenish containers and product. A doser above a bagger must release into the bag at the correct point in its cycle.Compare output through the receiving hopper, funnel and indexer as well as the weighing head. Coordinate the required closure and handling in the packaging automation plan. Record acceptable complete packs, rejected doses, residual product and spillage.Changing particle size or target dose can require new feed and cutoff settings or different contact parts. A new bottle mouth or bag size can change the funnel, support and timing. Include setup and cleanout time when several products share the installation.

Compare the quantity delivered into the actual package

Compare the volume, weight or exact count delivered into the actual package after discharge through the funnel. Include residual material, spillage and product condition in the check, and confirm that each dose reaches a package ready to receive it.Comwin can select the feeder and metering unit together with the bag or container handling. The offer should list supports, platforms, controls, closing equipment and change parts, making clear what is included with the doser.Comwin offers free sample testing, a two-year machine warranty and a three-year warranty for core components. Remote support responds within 24 hours. Training, installation and spare-part responsibilities are agreed in the proposal.

Tell us the product, quantity and package

Send Comwin the granules, target dose or piece count, and the bag or container. Add the required output and any important limits on breakage, spillage or weight variation.Comwin can recommend the measuring method and package handling from these details. For the proposal, also provide particle size and flow, container opening, required closure, format changes, layout, utilities and destination.

Table of Contents

Our packaging categories

We offer a complete range of packaging solutions.

Packing Sample
Bagged packaging
Packing Sample
Vacuum packaging
Packing Sample
Blister Packaging
Packing Sample
Filling/Bottling
Packing Sample
Heat Shrink
Case packaging
Case packaging

Get Your Quote

What delivery did you have in mind? Fill in the details below to receive a quote.