Start with horizontal flow wrapping for ice cream bars and sandwiches. Support a stick bar under its body so the stick and coating clear the former. A sandwich needs a broad transfer surface to keep the cookie from breaking. Cones that arrive already sealed can move directly to a specified retail carton.
A compatible horizontal wrapper is US$5,000–25,000 for early budgeting. A separate retail cartoner is US$25,000–80,000. Quote freezer discharge, product supports, lane control and grouping for the actual product.

Start with the product at the infeed
| Product arriving at packaging | First route to test | What changes the choice |
|---|---|---|
| Frozen stick bar, coated or uncoated | Individual pillow wrap on a horizontal flow wrapper | Test stick projection, coating marks and clearance at both ends. |
| Cookie ice cream sandwich | Supported belt infeed into a horizontal wrapper | Keep the underside supported across the transfer. Inspect crumbs and seal contamination. |
| Filled cone with its primary sleeve already closed | Count the cones and load a retail carton with a suitable cartoner | Agree which end leads, whether a divider is needed, and how the lid avoids the carton flaps. |
After freezing: support → space → wrap and seal
Already in sleeves: count → load retail carton → close
Find where the frozen product loses support
Run the coldest normal product through the transfer and check where coating marks or crumbs first appear. If pieces break during transfer, correct the support or drop before changing the wrapper settings. Compare good closed packs at the required rate.

Ask for a continuous side view from freezer discharge to film entry. Watch for a sliding bar or a cookie edge catching at a gap. Mark the first damaged pack and trace it upstream. If rejects increase after a pause, inspect how long products wait and where they contact warm surfaces before changing jaw temperature.
Compare manual placement with automatic transfer at the actual shift rate. Manual loading may suit short runs with varied shapes. For a linked infeed, agree who supplies pitch control, what happens when the freezer continues feeding during a wrapper stop, and how restart rejects are removed. Ask the supplier to count saleable packs after stops and replenishment as well as during steady running.
Carton count determines the next handoff


A four-pack needs four good wrapped units at the loader for every carton. Agree how a missing or rejected unit is detected and how the count is rebuilt. Ask to see a loaded sample before ordering carton tooling. A carton that fits a still sample may bind when the film tails curl or a cone enters off centre.
Ice cream packing machine price by equipment scope
For early planning, allow US$5,000–25,000 for a compatible horizontal wrapper and US$25,000–80,000 for a separate compatible retail cartoner. Use the wrapper band for a frozen sandwich as a starting point only after its dimensions and support needs fit the base machine. Price freezer transfer, lane merging, counting, special cooling provisions, carton tools and integration as separate line items. These equipment references exclude freight, import charges and site installation.
Compare quotes on the same film, load pattern and acceptance test. For a used listing or a model number such as GG-400 or GTA450, ask for the exact machine, the format tooling and a continuous trial clip with your product. A listing or a demo with a different bar gives little information about changeover work or sustained yield.
Can the wrapper make ice candy tubes?
A liquid ice pop tube starts with a doser and a compatible film sealing system. The filled tube goes to freezing afterwards. Send an empty tube, target fill volume and formulation details if this is your product. A frozen stick bar follows the solid-product wrapping route above.
Start with photos, sizes and the required output
Send product photos at freezer discharge, dimensions including the stick, the intended pack and your target good packs per hour. Comwin can propose the product supports and wrapping or cartoning scope. We can then arrange sample testing with your film and carton, and confirm cold-side space and cleaning requirements before the configuration is settled. Discuss your ice cream packaging line.
