For cube, tube or crushed ice, match bagging to the ice condition and finished bag. Manual bag presentation can suit changing small runs. Repeated roll-film bags use matched weighing and VFFS; selected premade bags need their own opening, holding and closing system.
Indicative budgets are USD 6,000 to 18,000 for a semi-automatic weighing, loading and closing combination, USD 25,000 to 70,000 for a matched ice-weighing and VFFS combination, and USD 35,000 to 90,000 for automatic premade-bag handling. Comwin defines the wet, cold handling arrangement alongside the bagging scope.

Choose a bagging route that handles the actual ice and seal area
| Packing route | Starting condition | Equipment and handling | When to change |
|---|---|---|---|
| Manual bags with weighing and closure | Small mixed bag weights with operator presentation. | Feed and weigh ice, load an existing bag and use the selected heat seal or tie. | Add automatic bag presentation when placing and holding bags becomes the bottleneck. |
| Ice weighing with VFFS | A repeated roll-film bag format and regular ice supply. | Manage feed and clumps, weigh ice, form the film bag, fill and seal. | Use matched wet/cold materials, closing and drainage; ordinary dry-product configuration is not assumed. |
| Ice weighing into premade bags | A specified existing bag, such as a retail handle bag. | Open and hold the bag, fill the weighed ice and close it. | Change the bag or handling route if wet bags cannot be presented consistently. |
Ice production capacity is an incoming supply figure. Packaging capacity is acceptable filled bags leaving the closing operation. Include feed interruption, clumps, meltwater and short-stop recovery when matching them. An ice maker, large storage bin and cold room are separate from the packing budget unless explicitly listed.

Handling problems and the configuration response
| Problem | Likely mechanism to assess | Configuration and check |
|---|---|---|
| Ice or water crosses the seal | Filling timing, bag allowance or drainage leaves contamination at the closing area. | Control the filling drop and seal clearance, then trial the actual bag and ice under wet conditions. |
| The hopper bridges after a pause | Clumps or changing ice size interrupt flow. | Match residence time, accessible draining and an appropriate clump-handling arrangement. |
| Filled weight changes | Ice flow and meltwater change between feed and closing. | Define when weight is measured and test steady running and restart at the actual incoming condition. |
| A quoted bag rate cannot clear the ice supply | Kilograms per hour and bags per minute were not converted. | Use bag weight to convert the requirement and check feeding, weighing and closing against it. |
Match the route to your production situation
| Product and situation | Finished pack | Starting equipment | What changes the choice |
|---|---|---|---|
| A small operator changes ice-bag weights during the day. | Existing bags filled and closed by the selected method. | Semi-automatic weighing with manual bag presentation. | Automate presentation only if placing bags limits output. |
| An illustrative steady 5 kg cube-ice order. | Filled and heat-sealed roll-film bags. | Matched weighing and VFFS. | Test wet seal areas and stop/restart behaviour with actual ice. |
| A retailer requires a specific handle bag. | A filled premade handle bag with its chosen closure. | Matched premade-bag filling. | Confirm that the bag opening and holding system works when cold and damp. |

A steady 5 kg bag
For this example, connect the ice feed, weighing and bagger around one actual bag specification. Keep the seal area clear of falling ice. Record filled weight and finished-seal condition after a short interruption as well as during continuous running.

Mixed retail bags with handles
Start with the existing bag and the required closure. An operator-held bag can be a useful starting point for varied runs. For automation, trial the bag opening, support during filling and release after closing; the handle does not make it compatible with every bagger.
Ice packing machine price and scope
These October 2026 indicative budgets are for new equipment supplied from China, one defined product and one selected format. They are early planning ranges; a formal quotation follows the agreed configuration. Freight, tax, overseas installation, site work, upstream production, extra formats and unlisted gas generation or options are excluded. Commercial terms are agreed in the quotation.
| Equipment scope | Indicative budget | Included scope | Separately specified |
|---|---|---|---|
| Semi-automatic ice weighing, loading and closing | USD 6,000 to 18,000 | Matched basic feed/weighing and one closing method, with manual bag presentation. | Ice making, refrigerated storage, automatic bag presentation and palletizing. |
| Ice weighing and VFFS combination | USD 25,000 to 70,000 | One ice condition and bag format, basic matched feed, weighing and sealing. | Ice production, large storage systems, cold room and downstream packing. |
| Ice weighing and automatic premade-bag combination | USD 35,000 to 90,000 | Bag opening/holding, matched weighing/loading and one selected closure. | Ice production, cold room and palletizing. |
An illustrative supply of 3,000 kg per hour in 5 kg bags requires 600 bags per hour, or ten bags per minute. Match that demand to acceptable output with the actual ice supply and available operating time.
Where automation helps the workload
Choose automatic bag presentation or roll-film bagging from the required bag structure and feed pattern, after wet/cold handling is matched.
| Dimension | Manual or simpler arrangement | Added automation and decision |
|---|---|---|
| Production pattern | A small operator changes ice-bag weights during the day. | Choose automatic bag presentation or roll-film bagging from the required bag structure and feed pattern, after wet/cold handling is matched. |
| Operator steps | List presentation, product preparation, loading and collection for the actual route. | Automate the limiting step; replenishment, checking and collection remain explicit in the scope. |
| Changeover and cleaning | Cube, tube or crushed ice; size range, temperature, clumps and meltwater. Check the actual format mix. | Agree guides, tooling, contact-part changes and cleaning access for the product change. |
| Acceptance | Control the filling drop and seal clearance, then trial the actual bag and ice under wet conditions. | Measure acceptable finished packs, operator involvement, stop/restart behaviour and agreed rejection checks. |
Compare proposals on the same packing task
| Dimension | Evidence to compare | How Comwin responds |
|---|---|---|
| Budget and scope | Use the same product, pack, handling and included operations. | We separate the packing machine, matched feeding and any downstream equipment in the proposal. |
| Output | Compare finished seals and filled weights with wet ice, including the response to a short interruption. | We match the required acceptable output and interfaces to the actual product and material. |
| Product and format fit | Control the filling drop and seal clearance, then trial the actual bag and ice under wet conditions. | We select the suitable configuration and any needed handling or format changes from your samples. |
| Support | Identify training, contact parts, spares, warranty and response responsibilities. | We define the support scope alongside the selected equipment. |
| Delivery | Confirm samples, format, drawings, documents and acceptance milestones. | We agree the project plan after its configuration and responsibilities are settled. |
Questions buyers ask before selecting equipment
Can an ordinary VFFS machine pack ice?
For ice, specify wet/cold film handling, closing, drainage and the electrical environment. Select a matched configuration after testing actual ice; a dry-product demonstration is insufficient.
Is the ice maker included?
If the quotation covers bagging, it receives ice from the defined upstream supply. List ice making, storage and the cold room separately when a wider project is needed.
How much bagging capacity do I need?
For each bag weight, divide incoming kilograms per hour by kilograms per bag, then allow for your actual available operating time and feed interruptions.
Can it seal a wet bag?
For your film and ice, control water and ice at the seal area and trial the chosen closing process. Define acceptable seals under real operation and after restart.
Send the product and finished pack for a matched proposal
Send product and finished-pack photos or samples, the required fill or count, and acceptable output per shift. We can then identify the starting configuration. For the detailed proposal, include:
- Cube, tube or crushed ice; size range, temperature, clumps and meltwater.
- Roll film or premade bag, handle design, actual material and sizes.
- Net weight and tolerance, upstream kilograms per hour and weighing point.
- Heat seal or other specified closure and observed seal-area contamination.
- Bag/shift and kilogram requirements, interruptions and operators.
- Drainage, cold-room handoff, layout, electrical environment and compressed air.
We return the recommended operations and reasons, included equipment and options, product/material trial requirements and a quotation for the defined scope.
Premade-pouch packaging equipment.
Comwin provides free sample testing and can arrange a visit to an actual factory to see equipment running. Whole-machine warranty is two years, with three years for core components and remote response within 24 hours.
Arrange free sample testing. Send your packing requirements.
